UniFi Access Reader Lite 3.18.21.0 includes the following bugfixes.

Bugfixes

• Fixed an issue where hand wave and NFC card authentication could fail on EAH-8 battery backup during power outages.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Reader Lite 3.18.11 includes the following improvements.

Improvements

• Optimized LED and sound behavior.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Reader Lite 3.17.11 includes the following improvements.

Improvements

• Optimized device performance.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Reader Lite 3.16.8 includes the following bugfixes.

Bugfixes

• Fixed an issue where doors sometimes failed to unlock due to an Out Of Memory error.
• Fixed an issue where door unlock failures were not recorded in the System Log.
• Fixed an issue where the device might not respond when unlocking the door with credentials.

Additional information

• This version is rolling out gradually. If you haven't received it yet, please wait. It will be available within the next few days. To update manually, download the firmware from the provided link, then go to Site Manager > UniFi Console > Access > Devices > select your device > Settings > Manual Firmware Update.
• If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Reader Lite 3.16.3 includes the following bugfixes.

Bugfixes

• Fixed an issue where newly registered UA Cards and UA Pockets sometimes could not unlock doors when the Third-Party NFC Cards option was disabled.
• Fixed an issue where NFC cards sometimes failed to register when the device was connected to a switch.

Additional information

If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > UA Lite > Settings > Download Support File.

UniFi Access Reader Lite 3.15.4.4 includes the following improvements.

Improvements

• Optimized the device logs and performance. 

Additional information

If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > select the hub to which your device is connected > Settings > Download Support File.

UniFi Access Reader Lite 3.15.4 includes the following improvements.

Improvements

• Improved the credential verification process and door unlocking speed.

UniFi Access Reader Lite 3.14.2 includes the following bugfixes.

Bugfixes

• Fixed an issue where the reader sometimes automatically restarted, even when only the UniFi Console was restarted.

UniFi Access Reader Lite 3.13.19 includes the following improvements and bugfixes.

Improvements

• Improved the door unlock stability. Update to UniFi OS 4.1.11 or later for optimal user experience.
• Enhanced the Mobile Tap experience.
• Requires the latest iOS mobile app version to allow door unlocking from a locked iPhone:
• Identity Endpoint for iOS 1.2.0 or later
• Identity Enterprise for iOS 0.82.1 or later
• To use Mobile Tap while the app runs in the background, set the app's location permission to "Always" in your phone's Settings > Apps > Identity > Location > Always.
• Requires the latest Android mobile app version to ensure optimal Mobile Tap experience:
• Identity Endpoint for Android 1.2.0 or later
• Identity Enterprise for Android 0.82.1 or later

Bugfixes

• Fixed an issue where door unlocking with Access credentials failed temporarily after the device restarted.

UA-Lite 3.12.9.0 includes the following improvements and bugfixes. 

Improvements

• Optimized Mobile Tap's distance detection to unlock only at close range when the proximity is set to "Near."

Bugfixes

• Fixed an issue where NFC card swipes experienced a delay in response.
• Fixed an issue where locations couldn't be unlocked using Mobile Unlock.

UA-Lite 3.11.10.0 includes the following improvements and bugfixes.

Improvements

• Support emitting a sound when the door is unlocked remotely. Enable Swipe Sound in Access application or mobile app > select a UA-Lite > Settings > Advanced.
• The Access application can now discover UA-Lites that are not connected to Access Control Hubs.
• Support manually downgrading UA-Lite to lower versions.
• Improved door-opening resilience.

Bugfixes

• Fixed an issue where NFC card swipes experienced a delay in response.
• Fixed an issue where the hand-wave unlock only worked at a distance of around 3.5 cm.
• Fixed an issue where no sound or LED activation occurred during a failed door-unlocking attempt.
• Fixed potential adoption failure issues.
• Fixed an issue where a UA-Lite using a public IP network segment did not appear in the Access application.

• [Identity Enterprise] Fixed the issue where a door could still be unlocked using mobile access methods through Bluetooth even if they have been disabled.

UA Lite v3.9.20.0 has optimized the door-unlocking experience and fixed some bugs.

Improvements

Door Access Method

• Enhanced the sensitivity of the Hand Wave door access method.

Bugfixes

Door Access Method

• Fixed the issue where the reader did not indicate unlock failures while using cards linked to the HCE mobile wallet.
• Fixed the issue where users could not unlock doors using the Mobile Tap feature of the Identity Enterprise Android app.

Others

• Fixed the issue where the reader went offline during VLAN switching.

Door Unlock

• Fixed the issue where doors could not be unlocked with a handwave or UA card.
• Fixed the issue where doors sometimes could not be unlocked after a device upgrade.

Door Access

• Optimized the speed for unlocking doors using the Identity mobile app.

Bugfixes

Door Unlock

• Fixed an issue where doors sometimes could not be unlocked using NFC cards and Handwave.

Mobile Access

• Fixed an issue where users could not unlock doors using Mobile Access.

Devices

• Fixed an issue where users sometimes could not unlock doors using the device.
• Fixed an issue where the sound and light indicator sometimes were delayed after a door was unlocked.

• Fixed an issue where users sometimes could not unlock doors using UA Lite.
• Fixed an issue where UA Lite went offline unexpectedly.

• Fixed an issue where UA Lite went offline and then came back online when its DHCP lease time expired.
• Fixed an issue where the light color of UA Lite changed from blue to white after the device was powered off and then powered on.
• Fixed an issue where UA Lite went offline occasionally after UniFi Access was upgraded to UID Door Access.

• Support adjusting the display light brightness and disabling the sound of UA-Lite (Go to UniFi Portal > UniFi Access application > Devices > select a UA-Lite > Settings > adjust Display Brightness and disable Sound Alert).

Note: This feature requires UniFi Access application v1.4.6 or above. The latest version is v1.4.9.

• Fixed an issue that caused door unlocking failure.

Notes: To fix this issue, please update the following applications to the corresponding versions:

• UniFi Access Application: v1.4.3.
• UID Agent: v1.49.2 (Expected to be released before June 17, 2022 ).